I am looking to basically just transition to a small time, forever on, server to support my growing Plex footprint. I don’t need anything top of the line, and I’ve already crimped my lines to the room.
What’s the most cost effective way to go about this? Figured i would come to the pros.
Thanks!
Got an old laptop? I recommend that. Put linux on it.
The comments aren’t doing a great job of explaining this but Plex can run on virtually any reasonably modern hardware: old laptops, thin clients, an old desktop, scrap parts. If you can get linux running on it, you can run plex for local network usage with one or two users.
Where hardware starts to matter is if you need to expose it to lots of simultaneous users or you need to do lots of transcoding. I do know of some users with giant libraries where the libraries can be a little slow to browse but it can be helped with a cache SSD for the metadata.
At this point the iGPU on intel processors is the easiest way to do transcoding and can handle a lot of streams with hardware transcoding. I used to have a nvidia card in my box and realized the iGPU was actually better anyway. I also think your streams should be direct play as much as possible. It’s much easier and more efficient to have your library on a flexible format to start and just avoid on demand trsnscode.
If you need external access and need a VPN, you need a little extra power - or a separate device.
Now, OP didn’t ask but I’ll give my two cents on Plex vs Jellyfin.
Objectively, Plex is still the easiest to set and forget and is the most feature rich. I used it for something close to 15 years. I finally dropped it when I couldn’t watch live tv anymore because of a known bug they just refused to fix for over a year. That was the last straw for me on top of all the enshittification.
I tried Jellyfin and found it lacking features and it was more difficult to manage securely. That led me to Emby. I’m not sure why it never comes up in these discussions. It’s a nice middle ground. Jellyfin is a fork of Emby from when Emby decided to go closed source to try to figure out a sustainable financial model so they’re very similar but Emby gives you back some of the convenience features from Plex.
But ultimately I think this is a personal preference and none of these are one size fits all. Plex is a reasonable place to start but, in my opinion, Emby is worth a look. Jellyfin is the ultimate choice for open-source, personal control, and privacy that the other two can’t match because of their financial models.
Going with a cheap used system, and then adding an Intel a310 is a good start. For getting drives, look into getting some external Seagate drives, popping them open, and using them internally. Just a couple ideas 😊
Personally I would do this
Find an old laptop, desktop, any computer
Put proxmox on it. It’s free and lightweight
Create a Plex LXC. Also free and lightweight. There are community scripts to do this.
You should get pretty good performance on Plex, you can manage the computer through a web browser and it only costs you whatever the cost of finding some hardware to put it on is
It really depends on what you need.
Plex relies on the client device to provide the necessary compatibility to play thing, otherwise the server needs to transcode it into something that is playable.
Which means that when you curate your library in a way that is completely compatible with your clients, you can run a Plex server on a raspberry pi. If you don’t, and you need transcoding then you also need the hardware to do so.
This also depends on what needs to be transcoding, a 4K video will require a lot more performance than a 1080p Transcode.
Then, you need to distinguish between the different types of transcoding, when you have a Plex Pass, you can use a GPU for the transcoding, otherwise your CPU needs to do that.
In the last 1-1.5 years, the beelink mini pc with the N100 CPU was really popular because it was small, fairly cheap and had a iGPU in it that could even handle a couple 4K transcodes.
So, the first thing I would do is check what your requirements are. Do you have Plex Pass to be able to utilise hardware transcoding? Maybe also look in other players like Plezy for getting better compatibility than the official Plex app.
+1 for dropping plex for jellyfin.
I nuked plex when they started requiring an internet connection to log in- meaning plex was phoning-home even though I had not exposed the service to the internet in any way. I don’t know about you, but I don’t need an evil corporation knowing my catalog of linux distros.
- all of the plex premium options can be replicated for free, so fuckem.

